Authorised Best.Energy partner in the Baltic states

Until you measure, you can't see where and how your energy is wasted.

Identify the losses you can't see, take targeted action and pay only for what creates value. Amber Energy helps businesses uncover hidden energy waste. We typically identify 20–30% savings opportunities in consumption – in most cases without changing a single piece of equipment.

Most excess consumption comes not from the technology, but from operating modes, settings and staff habits.

Get a free energy waste assessment How it works
  • Authorised Best.Energy partnerin the Baltic states
  • No upfront investmentThe service is paid for from the savings
  • Our written guaranteeWe will identify savings opportunities worth at least what you pay for the service each month
  • A dedicated energy managerReviews your consumption data every week and recommends where to save
A hand holding a phone with the monitoring app – weekly consumption chart
14–30%

The share of a site's electricity that is typically avoidable waste.

20–30%

Typical savings opportunities identified.

1 min

We measure continuously and deliver data every minute – from the whole building down to individual machines.

70+

countries – 20 years of Best.Energy experience.

26,000+ active metering points 10 working days – first energy waste report

01 The problem

The bill shows a total, not the cause.

Your electricity bill does not show where energy is being wasted. Without metering down to individual machines, these losses stay invisible.

An energy audit shows what to change. But the changes soon stop working once nobody is tracking what happens.

“Without continuous monitoring, half of the initial savings are lost within 6–12 months.”

Source: Accenture

What we find on site

  1. 01

    Equipment switched on too early

    Switched on hours before work starts.

  2. 02

    Compressors running for nothing

    Compressors keep the system pressurised even when nothing is being produced.

  3. 03

    Ventilation and air conditioning around the clock

    Systems run at night too, although people are on site only during the day. Running them in working hours would be enough.

  4. 04

    Lighting in empty areas

    Lights on where there is nobody.

  5. 05

    ‘Phantom’ loads

    Forgotten or faulty equipment keeps running and uses far more energy than it should.

  6. 06

    Refrigeration running for nothing

    Fridges and cold rooms run more than they need to.

02 Example

240 minutes the bill never showed

The AI flagged a 240-minute gap between the machine being switched on and the start of production. At 06:00 the machine was switched on (a brief start-up spike to 0.33 kWh per minute), but production only began four hours later. In that time it needlessly used 7.3 kWh. A standard utility bill would never expose this.

Plastic injection moulding press in a factory, with an operator at the control panel
A press at a plastics factory – a Best.Energy client's site

Press consumption through the morning

Minute-by-minute data · 04:00–12:00

Best.Energy client example
0.060.040.020kWh per minute 04:0005:0006:0007:0008:0009:0010:0011:0012:00 240 min machine running, producing nothing ~0.03 7.3 kWh ↑ 0.33 – brief start-up spike Night ~0 (switched off) Production ~0.05 from 10:00
Example – press data from a Best.Energy client's plastics factory.
240minutes the machine ran without producing anything
7.3kWh wasted by a single machine in a single day
0.03kWh per minute – what the press used while waiting for production

03 How it works

A total becomes a cause. A cause becomes an action.

Measurement shows where the energy goes. A person makes sure the change happens – and lasts.

  1. 01

    The waste is there – you just can't see it

    The bill shows the final figure, but not its cause.

  2. 02

    We measure down to individual machines

    Our monitoring equipment continuously records the consumption of the whole building, individual zones and individual machines, and delivers the data every minute – you see not just the total, but the cause.

  3. 03

    Specialists turn data into action

    An energy manager reviews the data every week, and your team, supported by our specialist, implements the changes.

  4. 04

    The result is kept for the long term

    We measure and monitor continuously, so we spot a deviation the same week – not a year later.

04 Commercial model and guarantee

Not a system – a service with a guarantee

Problem

You want to reduce your energy costs, but you don't have the time to pore over the data.

Solution

We have the solution – we won't just identify where energy is wasted, we will carry it through to action and oversee the whole process with you.

Guarantee

We guarantee in writing: we will identify savings opportunities worth at least what you pay for the service each month.

The more expensive electricity gets, the more valuable every kilowatt-hour you don't use.

Service agreement

Client & Amber Energy

1. Subject of the service

Consumption monitoring down to individual machines and the energy manager service.

2. Payment

No upfront investment — the service is paid for from the savings.

3. Guarantee

We guarantee in writing: we will identify savings opportunities worth at least what you pay for the service each month. If we don't, we cover the difference ourselves.

Monthly service fee: € __________

4. Verification of results

Continuous measurement and monitoring: our team reviews the data every week, so we spot a deviation the same week.

Client
Amber Energy

Illustration. The final wording of the contract is agreed after a site survey.

No upfront investment

The service is paid for from the savings.

Our written guarantee

We will identify savings opportunities worth at least what you pay for the service each month. If we don't, we cover the difference ourselves.

From data to decisions

We analyse the data, recommend solutions and help you implement them.

Want to know how much you could save?

Get a free energy waste assessment

05 Business impact

How this affects your profit

Suitable for companies of all sizes. Depending on how much energy is being wasted, the service can pay for itself even for companies spending from €10,000 a year on electricity.

Typical savings opportunities identified
Annual electricity spendTypical savings opportunities identified
€150,000factory with 100–249 employees€30,000–45,000per year
€50,000factory with 50 employees€10,000+per year
1 kW = 8,760 kWh

The cost of a constant load: 1 kW left running around the clock for no reason uses 8,760 kWh a year (24 h × 365 days). Multiply by your electricity tariff.

How much savings potential is hiding in your site?

Typical savings opportunities identified (20–30%)

€30,000 – €45,000 / year

Get a precise assessment

Important: these are the opportunities we typically identify, not a guaranteed result. The exact figure only becomes clear once monitoring equipment is installed.

“There are two ways to increase a company's profit – grow sales or eliminate internal losses. We help businesses take the second route, which, unlike the first, carries no financial risk.”

06 Technology

Measurement, analytics and specialists – one service

Eniscope equipment measures consumption, the analytics find the losses, and an energy manager helps you remove them.

Monitoring device

Eniscope 8 Hybrid

We install the Eniscope hybrid IoT monitor on your incomers and distribution boards. It continuously measures consumption at building, zone and individual-machine level and delivers the data every minute.

Data
Every minute
Levels
Building → zone → individual machine
Capacity
Up to 24 single-phase or 8 three-phase circuits; gas, water and steam meters can be connected
Installation
Compact and quick to install, without disrupting your operations.
Connectivity
Can work over a separate mobile connection, without touching your internal IT network at all
Recognition
IBM Watson certified, rated 4.9★ on Capterra

Environment sensor

AirSense

Environment sensors (temperature and air quality) show precisely when heating or cooling is running for nothing.

Cloud platform

Eniscope Analytics

Real-time dashboards, automated alarms, remote control – on any device.

  • Managers see the financial return and the savings
  • Technicians get minute-level data
  • AI flags deviations from a machine's normal operating profile
The core, not an add-on

Service

Energy manager

A team of energy specialists working remotely. Data on its own saves nothing — people who act on it do.

  • 01Data analysis teamstudies the data and identifies excess consumption
  • 02Our specialisthelps turn insights into real changes
  • 03Your designated personmakes sure the recommendations are carried out smoothly within the company
Cover of the ‘Eniscope in action 2026’ brochure

Equipment brochure (PDF)

Download the Eniscope equipment brochure

12 pages on the Eniscope ecosystem, AI analytics and Best.Energy client results.

Download PDF

Thank you! We will be in touch within 1–2 working days.

07 Comparison

An audit is a photo. Monitoring is a continuous picture.

An audit captures a single moment. Monitoring shows every day and alerts you when something changes.

Comparison of a typical audit and Eniscope with an energy manager
CriterionOne-offTypical auditContinuousEniscope and an energy manager
Measurement A one-off snapshot Continuous measurement, data every minute
Detail Whole-building level Measurement down to individual machines
Recommendations Recommendations in a report Recommendations plus continuous checking that they work
Long-term effect The effect fades over time A deviation is visible the same week

08 Project timeline

Habits first. Investment – only when it pays back.

In the data we find where energy is lost through habits, operating modes or settings, and tell you what to change – for example, switching equipment off after the shift. That costs nothing. If upgrading equipment is worthwhile, we help you work out how quickly it would pay back.

  1. 0

    Free assessment

    Free

    From your 12 months of bills and meter data we build a first picture of energy waste. We prepare the first energy waste report within 10 working days.

  2. 1

    Installing the monitoring equipment and collecting baseline data

    4–6 weeks

    We build an accurate data picture of your site and train your designated person.

  3. 2

    Equipment operating times

    8–16 weeks

    We start with quick wins – aligning when each machine runs with when it actually should.

    Usually with no investment at all
  4. 3

    Process optimisation

    8–12 weeks

    We help implement solutions that need no additional investment. The aim is to turn identified opportunities into real savings.

  5. 4

    Technology measures

    from 28 weeks

    We recommend where upgrading equipment or controls is worthwhile and help you assess the payback.

09 Sectors

Who we help

In every sector the losses hide somewhere different – equipment running at night, off schedule, or more than it needs to.

  • 01

    Hotels and spas

    Laundries, kitchen ventilation, refrigeration, spas and pools.

  • 02

    Food and beverage

    Cold rooms, doors, compressor defrost cycles, cleaning equipment.

  • 03

    Retail chains

    Lighting before opening, ventilation outside opening hours, refrigeration at night.

  • 04

    Manufacturing

    We optimise compressors, line warm-up, extraction and HVAC in workshops.

    Food production, textiles, metal, plastics, furniture.

  • 05

    Facility management and education

    HVAC schedules, BMS settings, water consumption.

Who it suits

Suitable for companies of all sizes. Depending on how much energy is being wasted, the service can pay for itself even for companies spending from €10,000 a year on electricity.

10 Self-check

One number you can check for yourself today

Night consumption is the energy your building uses when nothing is happening in it. During the day, work justifies the consumption; at night, almost every kilowatt-hour is a loss.

  1. Log in to your electricity supplier's self-service portal.
  2. Look at the hourly smart-meter data – what is the average between 2 and 5 a.m.?

When the number is high, the natural question is: which machine is wasting electricity, and when? Only measurement down to individual machines can answer that.

1 kW×24×365=8,760 kWh

That is how much a 1 kW load left running for no reason uses in a year.

What your team can do

  • Draw up an end-of-day checklist for the last person to leave.
  • Check that ventilation and heating switch to night mode.
  • Switch off lighting and equipment nobody needs at night.
  • Once a month, 30 minutes after the shift ends, walk the site and note what is still running.
  • Show the night consumption figure to the team every week.

Note: this does not apply to sites running 24/7 without breaks – there we look at the minimum load level.

11 Results in the Best.Energy network

Results achieved by Best.Energy clients

Examples from public case studies in the Best.Energy partner network – from factories to hotels and retail chains.

Achieved

26.7%

annual energy savings achieved and maintained

Best.Energy network client · public case study

Featured case · Injection moulding, UK

Tex Plastics

  • £237,000saved per year
  • 3 monthsNo upfront investment. Net cash flow gain within 3 months.
  • −59.13%reduction in energy consumption in one area of the business within the first three months – from 41.5 kWh to 16.96 kWh a day
Watch the videoYouTube · opens in a new window
Achieved

9.34%

site-wide energy savings

Video · Best.Energy UAE

Video case · Food distribution, cold chain, UAE

Transmed

  • 1 monthPositive cash flow from the first month, with no upfront investment.
  • €0upfront investment – the service is paid for from the savings.
  • 45,877 kgless CO₂ per year.

Measurement first, instead of a solar plant. The refrigeration started running as much as the product needed – not the air.

Watch the videoYouTube · opens in a new window

  • Bonaprene

    Polyurethane parts · UK

    Identified30%savings opportunities
    Achieved18%energy savings in just 9 months

    More than £20,000 saved on energy bills annually. The client said: “I thought we would achieve 5–6% savings.”

  • Daktronics Ireland

    LED display manufacturing · Ireland

    Identified10%
    Achieved12.6%reduction in energy bills

    Consumption fell from 13,500 to 11,800 kWh a week. Payback – under 6 months.

  • Gina Corporate Clothing

    Clothing manufacturing · South Africa

    Identifiednot published
    Achieved40%reduction in consumption (kWh) over 8 years

    A solar plant installed earlier, without monitoring, did not deliver the expected effect.

  • Sankara Hotel

    Marriott Bonvoy hotel · Nairobi

    Identifiednot published
    Achieved20%site-wide reduction in consumption

    Laundry, kitchen ventilation and refrigeration operation optimised.

  • Nando’s

    Restaurant chain · India

    Identifiednot published
    Achieved21%average savings

    At one location consumption was cut by as much as 38.7%.

  • MENY / SPAR

    Food retail · Denmark

    Identifiednot published
    Achieved3 million kWhsaved every year; 600 tonnes of CO₂ emissions avoided

Want to know how much you could save?

Get a free energy waste assessment

12 Brands

Brands that work with Best.Energy partners

These brands work with the Best.Energy partner network to reduce their energy costs.

Clients of the Best.Energy partner network worldwide.

13 FAQ

Questions managers ask

Didn't find your answer? Write to info@amberenergy.lt.

Will we need to invest in new equipment?

Usually not. The first two stages (equipment operating times and settings) usually bring tangible benefits without any new equipment. We recommend upgrading equipment only where the data shows it pays back.

We already manage our energy / we recently had an audit.

Great. But does your current solution include real-time measurement down to individual machines? An audit is only a snapshot. Without continuous monitoring, half of the savings disappear within 6–12 months.

We don't have the time or a spare person.

That's exactly why we offer a service, not a system. We analyse the data, agree the actions with you and help you implement them.

We have solar panels.

Solar panels lower the price per kilowatt-hour. We lower the number of kilowatt-hours – because the cheapest energy is the energy you never use. If you are still planning a solar plant: first eliminate excess consumption, then size the plant to your real demand.

We don't own the building.

We work with your energy costs and equipment, not with the structure of the building itself.

Can you tell us exactly how much we will save?

Exactly – only once monitoring equipment is installed. The free energy waste assessment based on your bills gives a first picture. We guarantee in writing: we will identify savings opportunities worth at least what you pay for the service each month. If we don't, we cover the difference ourselves.

Is this suitable for a smaller company?

Yes. Monitoring usually pays for itself for companies using from around 60,000 kWh of electricity a year (a bill of about €10,000). For each site we work out the solution and its price individually – based on the number of machines and how much energy is being wasted.

Our IT department won't allow a connection to our internal network.

The equipment can work over a separate mobile connection, without touching your internal IT network at all.

Want to know how much you could save?

Get a free energy waste assessment
A manager with a tablet on his company's premisesService provided in Lithuania, Latvia and Estonia

14 About us

Authorised Best.Energy partner in the Baltic states

Amber Energy is the authorised Best.Energy partner in the Baltic states – Lithuania, Latvia and Estonia. Best.Energy provides the technology (United Kingdom, 20 years of experience, 70+ countries, thousands of sites). We deliver the service locally: from the site survey, installation of the monitoring equipment and monitoring itself to the energy manager service. Our specialist works with your team until real change happens.

  • 20years of Best.Energy experience
  • 70+countries
  • 26,000+active metering points

The device is only a tool. The value comes from measurement, analysis and the people who act on the data.

Free energy waste assessment

Find out how much energy your site is wasting – free of charge

Send us your electricity bills for the last 12 months and we will prepare a first energy waste report within 10 working days. It is free of charge and obligation-free. If the initial analysis shows there are no significant savings opportunities at your site, we will tell you so openly.

  • No upfront investment – the service is paid for from the savings
  • We guarantee in writing: we will identify savings opportunities worth at least what you pay for the service each month
  • The equipment can work over a separate mobile connection, without touching your internal IT network

Or write to info@amberenergy.lt

Call +370 639 23288

Book a 20-minute call

Assessment request

~2 min

We reply within 1 working day · No obligation · Written guarantee

We will use your details only to contact you about the assessment.

Thank you — we have received your request

We will email you and ask for 12 months of electricity bills. Once we have them, we will prepare the first energy waste report within 10 working days.

What happens next

  1. We call you
  2. We ask for 12 months of bills
  3. Report within 10 working days